Mobile Concrete Plant SUMAB M-22 (60–80 m³/h), Sweden

Sumab M-22 mobile concrete plant (Swedish).

Key advantages of the Sumab M-22 mobile concrete plant:

SUMAB mobile concrete plants have established a reputation as reliable, high-quality equipment for producing all types of concrete and concrete mixes, ensuring a high-quality end product.
Concrete production can begin just 3 hours after the plant is delivered to the job site!
The mobile concrete plant can be easily relocated from one site to another.
No foundation or regulatory permits are required for installation!
The plant can be set up on any site with a minimum area of ​​15 x 20 m.

The mobile concrete plant is capable of producing over 50 concrete grades, with the ability to change the mix design for each subsequent batch.
Automatic plant control via the Icon computer system.

Technical specifications and plant configuration:
The Sumab M-22 mobile concrete plant is designed to produce high-quality concrete and concrete mixes at a rate of 60–80 m³ per hour.

Exact production figures depend on the type and grade of concrete being produced, as well as the aggregates, cement, and chemical admixtures used.
The mobile concrete plant features a convenient control cabin and an automatic control system.
The modern Icon computer system supports the production of 50 different concrete mix designs and grades. It allows for the printing of data for each finished batch, showing the quantities (in kilograms and percentages) of aggregates and cement used during the mixing process.

The standard plant configuration includes the following components:
1. Fully automated mobile concrete plant with a capacity of 60–80 m³ per hour.
Mounted on a wheeled chassis.
2. Aggregate bins (4 x 4 m³).
3. Aggregate weighing sensors. Located beneath the planetary mixer. Dosing accuracy: ±100 g. Siemens (Germany)
4. Aggregate feed conveyor (from hoppers to mixer), incl. 4.5 kW electric motor; located beneath the hoppers.
5. Pan mixer (2200/1450 liters) lined with a 12 mm layer of special steel.
5 quick-release mixing paddles with fiber-plastic tips. Automatically opening discharge gate for finished concrete.
6. Galvanized water tank (500 liters) with built-in Danfoss pump and water dosing unit.
7. Air compressor (10 bar).
8. Mobile concrete plant control panel. Manual control keypad. Siemens PC touchscreen for automatic plant control. Supports 50 concrete mix designs with the ability to change the grade before each batch. Printer for batch reports (mix composition in kg and %). Data tracking by batch, hour, shift, and month.

Optional Extras:
High-pressure compressor (160 bar) for plant cleaning.
Cement feed screw conveyor – 220 mm diameter, 4.5 m length. 5.5 kW electric motor. Built-in cement dosing sensors.
60-ton cement silo, incl. filter, ladder, max/min level indicators, safety grate, and fill pipe.
Finished concrete discharge conveyor (from mixer). Length: 12 m; width: 1000 mm.
Chemical admixture pump with hose; automatic control via PC.